Imperial 535 sewing machine pedal. Some springs had come loose, but after replacement did not sew any better. Photo 2 by Don Tai
I thought that my Imperial 535 sewing machine pedal was a bit too sensitive, so today I opened it up. The bottom cover simply slides off, but is really tight. I had to use a screwdriver to pry it open a bit.
Inside there are no parts that I could see that required repair, only a bit of dust. Two springs were loose inside, so I put them back in place. The pedal works as it did before, so no improvement in function. The four rubber feet have long disintegrated. I could drill out the rivets and replace them, but would not improve the functionality of the machine.
Imperial sewing machine, model 535: Front, Perhaps made in Japan and badged in North America
Fate has voluntold me as the human caretaker of an Imperial Sewing Machine, model 535. This lovely machine was left out on the curb as trash, coincidentally as I was bicycling. Though the machine weighs a LOT, it is all metal and sews very beautifully. It even sews quieter than my Singer. The 535 has straight and zig zag stitching, and can darn. Included were about 5 different presser feet. Casting marks “J-C 27” and “304-1”, and printed marks “JA/3”. A thorough internet search has provided very little, except a couple of photos of similar machines, but images from Needlebar.org shows parts of similar looking machines were manufactured in Japan and badged in North America, circa 1950-’60s. As I did not see a Model 535 anywhere I hope that someone can see my photos and help me find its origins, and perhaps an owner’s guide.
