This electric glass kettle, the Hamilton-Beach 1.7L Electric Glass kettle, has been quite reliable over the last few years. It boils water quite quickly, faster than on our gas stove, which we have to turn on the fan and vent afterwards. It is also easy to clean. After a while the kettle stopped turning on, so I had to do a couple of things to it. Here is the user manual for reference. I did not see any replaceable parts available from Hamilton-Beach.
Viking Auto Dryer by the T. Eaton Company, 1995, front control panel. Photo by Don Tai
Dead it was, our dryer, a Viking Auto Dryer, from the T. Eaton Company, circa 1995, model number EDX22RW1181, front load, Toronto, Canada, hopelessly turning and turning, all without heat. Of course our clothes were not dry after an hour. Wife was not impressed and put the dryer at the top of my “to do” list. A solution was required before the next weekend load. Nothing stops for laundry or cooking.
These spanner slotted screw heads are a pain in the butt. My broken Black and Decker VS200 Heat Sealer used 2 of 9 screws as spanner slotted, the rest were philips. Why go non-standard? photo by Don Tai
Heat sealing some frozen corn with my Black and Decker VS200 heat sealer, from a 2 kg bag down to 0.5kg bags, I heard a pop, and then noticed the heat strip of my heat sealer was no longer hot. Damn, we are going to need a repair.
Old machinery is ugly, strongly made of metal, is serviceable and lasts a long time. This is the case of my Viking Auto dryer, made by the T. Eaton Company (long defunct), model no. EDX22RW1181. This dryer came with the house and has been working pretty well until recently. Ten years ago or so it stopped heating, so I took it apart and fixed the broken heating wire. Now it runs but the heat shuts off after about 20 minutes, so our clothing takes 3 hrs to dry. Why did I wait this long to repair the dryer? Because others in the house did not tell me of the problem until recently. Now that I cleaned out all the lint from 10 years it should run well again.
Olympia Nomad motorcycle jacket: nice jacket, well constructed inside and out
Textile motorcycle jackets are really for one time crash use, then they are trashed. “Face”, from Toronto, Ontario, Canada had bought an Olympia Nomad textile motorcycle jacket in May 2012, then lowsided at 80 mph in Montana in July 2012. With only a couple of months of use and about $300US later, it was a shame to trash the jacket. We opted to try a repair of the damage. The jacket had minor melting and a hole in the left elbow, some teeth missing from one of the air vent zippers, small rips of the cordura that covered the zipper, and abrasion and stitching destroyed in the slide. The right elbow had a couple seams abraded away that needed to be resewn.
GBC 450-KM binding machine: Maintenance is required for smooth and reliable function
All machines need maintenance or they will break down. My GBC 450-KM binding machine is no exception. My machine uses common plastic combs, will punch comb rectangles and bind into a booklet of varying thicknesses. Given use it will jam and will refuse to bind, so you need to open it up, trouble shoot, tighten and grease. The user manual also does not fully explain the left side controls of the machine nor any maintenance, so I thought I would embellish here.
